paint

Accroche

PRODUCT DESCRIPTION

"Accroche" Primary in aqueous phase for most supports.

Use also as primary insulation for wood.

- Inside and Outside

- Strong adhesion

- Use very easy

- Isolate seepage from wood

- Early water resistance

- Available in 4 hues (white grey, pink, yellow) according to the finish color

APPLICATION DOMAIN

- Wood / Wood panel

- Smooth surface : PVC, glass, pane, etc.

- Metals nonferrous

PREPARATION OF THE SURFACE

Do not neglect the preparation of the surface. This is an essential stage for a perfect realization of your finishing paint and to ensure its longevity.

Remove all dirt, including limestone, from the affect surface with a suitable cleaning product. Then, rinse and let dry. Remove all traces of grease and oil with a water-based degreaser. Rinse all surfaces.

Supports must be prepared in accordance with DTU 59.1. to which must be added the next specific preparation: funds must be sound, dry, consistent and specific to the application.

Impression

PRODUCT DESCRIPTION

Insulation undercoat in aqueous phase for walls and ceilings.

- Inside

- Exceptional coverage power

- Isolation of absorption differences

- Homogenize funds

- Good fluidity

- Very easy job

- Excellent holding

- High efficiency

- Recoatable with any type of paint

- Odorless

- Available in 4 hues (white grey, pink, yellow) according to the finish color

APPLICATION DOMAIN

- Plaster and plaster derivatives

- Cardboard plasterboard / plaster tiles

- Supports based on hydraulic binders (cement, concrete, cement coating)

- Brick

- Canvas to paint

PREPARATION OF THE SURFACE

Do not neglect the preparation of the surface. This is an essential stage for a perfect realization of your finishing paint and to ensure its longevity.

Remove all dirt, including limestone, from the affect surface with a suitable cleaning product. Then, rinse and let dry. Remove all traces of grease and oil with a water-based degreaser. Smooth surfaces should be sanded. There must be no presence of rust.

Supports must be prepared in accordance with DTU 59.1. to which must be added the next specific preparation: funds must be sound, dry, consistent and specific to the application.

Extra

PRODUCT DESCRIPTION

Polyurethane lacquer in aqueous phase, velvet, satiny, washable and resistant to most scratches. Microporous, very covering and resistant. Exceptional finish, high washability.

- Inside and Outside

- Very strong covering and filling power (be careful some colors require 3 layers)

- Very good hold

- Washable

- Very easy job

- Odorless

APPLICATION DOMAIN

- Damp room, Kitchen

- Wood

- Final layer for metal

PREPARATION OF THE SURFACE

Do not neglect the preparation of the surface. This is an essential stage for a perfect realization of your finishing paint and to ensure its longevity.

Remove all dirt, including limestone, from the affect surface with a suitable cleaning product. Then, rinse and let dry. Completely eliminate removed or la peinture cracked paint from this surface by scraping or sandblasting. Remove all traces of grease and oil with a water-based degreaser.

Supports must be prepared in accordance with DTU 59.1. to which must be added the next specific preparation: funds must be sound, dry, consistent and specific to the application.

Premium

PRODUCT DESCRIPTION

Acrylic paint very washable matte in aqueous phase for kitchen walls, entrance hall and bathroom with remarkable maintenance properties.

- Inside / Outside

- Extremely simple maintenance

- Emploi très facile

- Very easy job

- Well matte paint film

- Exceptional coverage power

- More resistant to scratches

- Practically odorless

APPLICATION DOMAIN

- Plaster and plaster derivatives / Plasterboard

- Non-woven wallpaper

- Fibreglass

- Concrete, cement, brick

- Old layers of paint

PREPARATION OF THE SURFACE

Do not neglect the preparation of the surface. This is an essential stage for a perfect realization of your finishing paint and to ensure its longevity.

Remove all dirt, including limestone, from the affect surface with a suitable cleaning product. Then, rinse and let dry. Completely eliminate removed or la peinture cracked paint from this surface by scraping or sandblasting. Remove all traces of grease and oil with a water-based degreaser.

Supports must be prepared in accordance with DTU 59.1. to which must be added the next specific preparation: funds must be sound, dry, consistent and specific to the application.

Mat

PRODUCT DESCRIPTION

Ultra matte paint in aqueous phase for walls, ceilings and rooms to live, based on an acrylic dispersion.

- Inside / Outside

- Ultra matte appearance

- Very easy job

- Almost odorless

- Resistant to water

- Breathable

- No yellowing

APPLICATION DOMAIN

- Plaster and plaster derivatives / Plasterboard and plaster tiles

- Panels concrete, cement, wood

- Cement plaster / Brick

- Tapestry

- Old layers of paint

PREPARATION OF THE SURFACE

Do not neglect the preparation of the surface. This is an essential stage for a perfect realization of your finishing paint and to ensure its longevity. Remove all dirt, including limestone, from the affect surface with a suitable cleaning product. Then, rinse and let dry. Completely eliminate removed or la peinture cracked paint from this surface by scraping or sandblasting. Remove all traces of grease and oil with a water-based degreaser.

Supports must be prepared in accordance with DTU 59.1. to which must be added the next specific preparation: funds must be sound, dry, consistent and specific to the application.